Telescopic carbon fiber boat hook

TELESCOPIC BOAT HOOK IN CARBON FIBER

Boat hook composed of two carbon fiber tubes with outer tube with rough finish for a better grip.

The extension of the boat hook is made by a button system that joins the outer tube with the interior allowing an extension of the boat hook of 1.55 meters and can advance every 25 cm to a total 2.80 meters (6 positions).

It includes inside rubber plugs that allow it to float in case of falling into the water.

It is compatible with the utensils of the main nautical brands.

Look at the attached photos if you want to see exactly what you are buying.

CHARACTERISTICS:

• Extended total length: 2800mm. (Tolerance ± 10mm.)

• Total length collected: 1055mm. (Tolerance ± 10mm.)

• Outside diameter of the larger pipe: 25mm. (Tolerance ± 0.2mm.)

• Outside diameter of the minor tube: 22mm. (Tolerance ± 0.2mm.)

• Inside diameter of the smaller tube: 19mm. (Tolerance ± 0.2mm.)

• Wall of the tubes: 1.5mm. (Tolerance ± 0.2mm.)

• Total weight: 480gr. (Tolerance ± 5%)

• Resin: Epoxy

• Orientation of the fibers: Bidirectional

If you need a boat hook with another length, diameter or thickness, do not hesitate to contact us, we can manufacture it.

______________________________________________________

NOTE:

All our tubes admit a certain tolerance in their measurements, this comes from the necessary cuts and the manufacturing process itself. They can then present in some cases irregular edges that in no case affect the quality of them, but if the size.

Although we always try to send our tubes with a size equal to or greater than the one offered, which we do in 90% of cases, remember that there is a reasonable margin for which we will not accept claims.

For this reason, and to avoid misunderstandings, if you need an extremely precise tube in the cut or size, do not hesitate to let us know at the time of placing your order so we can take it into account.