•Fast curing with moderate exotherm and retraction
•High deformation temperature (HDT)
•Good hydrolytic stability (water resistance)
•RP1: 5000 gr.
•BUTANOX M-50: 100 gr.
•Gel time (7-12min at 20ºC)
RP 1 is a medium reactive, thixotropic, pre-promoted resin, designed for use in the manufacture of composite parts using manual application methods. Curing allows faster production speeds without loss of surface profile. Post-cure reduction. Because the turn-over is faster, molds are required. Provides good resistance to osmotic blisters. It will provide good physical properties in the finished part.