POLYESTER KIT FOR LAMINATION - 255 gr.
Resin RP1 + Hardener BUTANOX M-50
PERCENTAGE RESIN / HARDENER (by weight)
100/2
Gel time (7-12min at 20ºC)
POLYESTER KIT FOR GENERAL USE:
-
Fast curing with moderate exotherm and retraction
-
High deformation temperature (HDT)
-
Good hydrolytic stability (water resistance)
-
RP1: 250 gr.
-
BUTANOX M-50: 5 gr.
-
Gel time (7-12min at 20ºC)
RP 1 is a medium reactive, thixotropic, pre-promoted resin, designed for use in the manufacture of composite parts using manual application methods. Curing allows faster production speeds without loss of surface profile. Post-cure reduction. Because the turn-over is faster, molds are required. Provides good resistance to osmotic blisters. It will provide good physical properties in the finished part.
______________________________________________________________
It is essential to use the correct weight ratio and use a digital scale, since otherwise the properties of the resin would be affected. Do not add more hardener looking to accelerate the curing time.
PERCENTAGE RESIN / HARDENER (by weight)
100/2
_________________________________________________________
For the management of the product it is essential to download and view the attached files that contain all the necessary information for a good use of this:
-DATA SHEET
-SAFETY FORM
-TRANSPORTATION FORM
- TYPE RESIN
- Polyester
- APPLICATION
- Lamination
You might also like