Wheelchair fender protectors set 100% carbon fiber

PERSONALIZE YOUR CHAIR with carbon

Set of two fender guards, right and left, made of carbon fiber and with a polished finish on the outer face and rough inside.

It is real carbon fiber, which will not only bring aesthetics to your chair but will make it lighter and stronger.

You can lean on them without fear of breaking them.

CHARACTERISTICS:

• Dimensions: 340 mm. (Long side) X 290 mm. (Short side) X 480 mm. (Curved zone) - (Tolerance ± 10mm.)

• Thickness: 2mm (Tolerance ± 0.5mm.)

• Weight: 250gr (Tolerance ± 50gr.)

• Carbon fiber 3K 200 gr / m2 Twill fabric 2x2 (Twill)

• Fiber orientation: 0º / 90º (Bidirectional)

These parts are shipped without any anchor for installation or assembly. The reason is to make them as versatile as possible and that can be adapted to a greater number of chairs.

You can use a drill with a metal drill, a jigsaw with a metal blade, a radial with a fine cutting blade, Dremel, etc.

NOTE:

All our pieces admit a certain tolerance in their measurements, this is given of the necessary cuts and of the manufacturing process itself. They may then have irregular borders in some cases that in no case affect their quality, but they do affect size.

Although we always try to send our pieces as close as possible to the offer, which we do in 90% of cases, remember that there is a reasonable margin for which we will not accept claims.

For this reason, and to avoid misunderstandings, if you need any very precise piece in weight or size, do not hesitate to let them know at the time of placing your order so that we can take it into account.