POLE BY SECTIONS FOR WORK AT HEIGHT
Pole composed of carbon fiber tubes with mesh view, made entirely with high quality carbon fiber. It is real carbon fiber, pressed and cured in the oven. With constant thickness, very high hardness and very little weight. If you are looking for a pole to perform all kinds of work at height and that is also very strong and resistant, lightweight and detachable this is your solution.
Being removable you will not have to support all your weight while you work, adjusting at all times its length to the type of work you need.
- Filming (mobile or fixed cameras).
- Sound, movies, recordings.
- Supports of all kinds.
You can join as many sections as you need!
Carbon fiber is an electrically conductive material, so you have to take into account the necessary preventive measures depending on its use. It is recommended to use the fiberglass grip section to serve as an insulator.
If you need a pole with another length, diameter or thickness, do not hesitate to contact us, we can manufacture it.
Look at the attached photos if you want to see exactly what you are buying.
CHARACTERISTICS BY SECTION:
• Length: 1000mm Tube + 200mm Coupling section included (Tolerance ± 10mm.)
• Outside diameter: 40.5mm. (Tolerance ± 0.2mm.)
• Internal diameter: 37.5mm. (Tolerance ± 0.2mm.)
• Wall: 1.5mm. (Tolerance ± 0.2mm.)
• Weight: 450gr. (Tolerance ± 15gr.)
• Resistant to heat (Thermal stability 180º)
• Carbon fiber: 3K 200 gr / m2 Fabric Twill 2x2 (Twill)
• Orientation of the fibers: Bidirectional
Since our tubes are made of 100% carbon fiber, and with a very constant thickness, they are perfect for precision or structural work.
All our tubes admit a certain tolerance in their measurements, this comes from the necessary cuts and the manufacturing process itself. They can then present in some cases irregular edges that in no case affect the quality of them, but if the size.
Although we always try to send our tubes with a size equal to or greater than the one offered, which we do in 90% of cases, remember that there is a reasonable margin for which we will not accept claims.
For this reason, and to avoid misunderstandings, if you need an extremely precise tube in the cut or size, do not hesitate to let us know at the time of placing your order so we can take it into account.