Polivaks ™ EKO PVA liquid release agent (polyvinyl alcohol)

Polyvinyl alcohol liquid release agent for Polivaks ™ EKO PVA resins. Easy to apply with brush or gun.

It forms a film between the mold and the sheet. Allow to dry 1 hour between each layer. To accelerate drying, the mold can be heated up to 40 - 50 ° or leave the mold in place of sufficient air flow.

It can be applied as a final layer behind the layers of wax, being careful to leave it well extended to avoid accumulation of product or bubbles caused by a bad application.

When we look for a good aesthetic finish we recommend its use with a gun. To apply manually by non-expert hands is easier to use the release wax that we offer in CLIPCARBONO. "HERE"