Protector covers bars or tubes. Carbon-kevlar red finish. (For measurements from 40 mm outside Ø)

1000mm x (41.2mm.exterior / 40mm interior)

Carbon-kevlar red fiber tube with mesh view, made entirely of carbon fiber-Kevlar high quality.

It is real carbon fiber-kevlar, pressed and cured in the oven. With constant thickness, very high hardness and very little weight.

If you are looking for the benefits of carbon-kevlar tube with mesh aesthetics, this is your product.

If you need a tube with other lengths, diameters or thicknesses, do not hesitate to contact us, we can manufacture it.

Look at the photos if you want to see exactly what you are buying.

CHARACTERISTICS:

• Length: 1000mm. (Tolerance ± 10mm.)

• Outside diameter: 41.2mm. (Tolerance ± 0.2mm.)

• Internal diameter: 40mm. (Tolerance ± 0.2mm.)

• Wall: 0.6mm. (Tolerance ± 0.2mm.)

• Weight: 127gr (Tolerance ± 5gr.)

• Resistant to heat (Thermal stability 180º)

• Carbon fiber-kevlar: 3K 200 gr / m2 Twill 2x2 fabric (Twill)

• Orientation of the fibers: Bidirectional

Since these tubes are made of carbon fiber-Kevlar 100%, and with a very constant thickness, they are perfect for precision or structural work.

_________________________________________________ 

NOTE:

All our tubes admit a certain tolerance in their measurements, this comes from the necessary cuts and the manufacturing process itself. They can then present in some cases irregular edges that in no case affect the quality of them, but if the size.

Although we always try to send our tubes with a size equal to or greater than the one offered, which we do in 90% of cases, remember that there is a reasonable margin for which we will not accept claims.

For this reason, and to avoid misunderstandings, if you need an extremely precise tube in the cut or size, do not hesitate to let us know at the time of placing your order so we can take it into account.