Kevlar felt resistant to fire, high temperatures and thermal insulation for clothing, clothing and protections 300gr / m2





Fire (****)

Cut (****)

Abrasion (****)


Depending on the meters you choose we will apply a discount on the price of the product.

You can see the discount applied in your shopping cart before making the payment.

More details

56,14 € ( 46,40 € tax excl. )

Volume discounts

QuantityPrice Ahorra
A partir de 5 unidades 50,53 € (IVA incluido) Ahorra un 10%
A partir de 10 unidades 44,91 € (IVA incluido) Ahorra un 20%
A partir de 25 unidades 42,11 € (IVA incluido) Ahorra un 25%
A partir de 50 unidades 39,30 € (IVA incluido) Ahorra un 30%
A partir de 100 unidades 36,49 € (IVA incluido) Ahorra un 35%

Data sheet

WIDTH1500 mm.

More info


100% non-woven Para-Aramid felt of 300 gr / m2.

Its 100% Para-Aramid composition makes it ideal for high performance applications where complete protection against fire, cuts, abrasions or friction with a reduced weight is required.

It provides protection with a soft, warm, thick and economical product, perfect to use alone or in combination with other fabrics as it is pleasant to the touch with the skin.

Application as protection against fire, aggressions with white weapon, aggressions of animals, falls with rubbing or abrasion such as those that occur on motorcycles, etc.

Both for interweaving and to isolate or reinforce certain areas.

Look at the photos and the attached video if you want to see exactly what you are buying.


These tissues serve as protection given their good qualities in the face of aggressions, but they do not exempt the prudence and common sense that each one should apply to avoid accidents.

Likewise, in many occasions to obtain adequate protection, several layers of fabric must be used or different fabrics combined, ALWAYS being under the responsibility of the client the use made of these.

Therefore, Clipcarbono is not responsible in ANY case for any possible damage suffered by our customers during the use of our products.


  • Weight: 300gr / m2 (Tolerance ± 15gr.)

  • Composition: 100% Para-Aramid

  • Resistance to fire (****), cut (****) and abrasion (****).

  • Fluffy, warm and thick.

  • Fire retardant

  • The most affordable way to have 100% Para-Aramid

  • Roll width: 1500 mm.

  • Length: from 50 cm. up to 100 meters

  • Color: Raw yellow, para-aramid can see its color altered quickly by sunlight.


Internal reinforcement of garments where comfort is important and good protection is required against cuts, aggressions or high temperatures based on thickness.

Filling between fabrics, its good price and thickness make it very suitable to obtain a good thickness with few layers and therefore a good protection and insulation without this implying a very high weight.


We can serve you this product in rolls of up to 100 linear meters.

Unless otherwise requested by the customer, the fabric is shipped bagged up to 10 linear meters, from this amount it is sent rolled.

If you want a small quantity, remember that we have commercial samples at your disposal in the sample category.



Our fabrics are cut directly from the roll, and although we are very careful when working with them, when it comes to small quantities they can present some moved thread, wrinkles or manipulation signs, and we will not accept claims for this reason. In quantities greater than 10 meters we send in roll, which guarantees a perfect conservation of the mesh.




You can buy a sample to see and touch the product at an economical price and with only € 1 of shipping costs.


Click HERE to buy.

Customers who bought this product also bought:

30 other products in the same category: