Glass fiber rebar. Diameter 6mm. Length 2000mm.
Glass fiber rebar. Diameter 6mm. Length 2000mm.
Glass fiber rebar. Diameter 6mm. Length 2000mm.
Glass fiber rebar. Diameter 6mm. Length 2000mm.
Glass fiber rebar. Diameter 6mm. Length 2000mm.
Glass fiber rebar. Diameter 6mm. Length 2000mm.
Glass fiber rebar. Diameter 6mm. Length 2000mm.
Glass fiber rebar. Diameter 6mm. Length 2000mm.

Glass fiber rebar. Diameter 6mm. Length 2000mm.

VCV6L2
Available for immediate shipment.
€4.72
Tax included
€3.90 tax 21% excl.

Glass fiber rod for structural reinforcement.

Quantity Unit discount You Save
5 5% €1.18
25 15% €17.70
50 30% €70.79
100% secure payments
 

Manufactured by pultrusion with glass fiber reinforced epoxy resin.

Designed to strengthen concrete, wood and masonry structures.

- Very high resistance and durability.

- Light.

- Non corrosive.

- Very easy to handle.

- Excellent resistance to fatigue.

- High modulus of elasticity.

- It requires little preparation.

- High bond strength due to complete encapsulation.

- The rods are not visible once installed.

- Resistant to alkalis.

Storage conditions:

- Protect from direct sunlight.

Applications:

- Reinforcement of negative moment in slabs and roofs.

- Anchoring of carbon fiber fabrics.

- Reinforcement of masonry walls.

- Cathodic protection applications

- Increased resistance to impacts, earthquakes, explosions, fire, etc.

- Improve or repair structures by:

Need to increase the resistance capacity of slabs, beams and bridge sections.

Live loads increase.

Higher load on stationary roofs.

Installation of heavy machinery.

Structures subject to vibrations.

Changes in the use of structures.

- Damage to structures due to:

Aging or deterioration of original materials.

Corrosion of the armor.

Impacts.

Fire.

- Improvements in service capacity:

Decrease in deformations and arrows.

Stress reduction in steel reinforcement.

Reduction of fatigue.

- Changes in the structural system:

Elimination of walls or columns.

Elimination of slab sections for stairwells, elevator, etc.

Design or construction defects.

Insufficient reinforcements.

Insufficient structural depth.

Look at the attached photos if you want to see exactly what you are buying.

FEATURES:

  • Length: 2000mm. (Tolerance ± 5mm.)
  • Diameter: 6mm. (Tolerance ± 0.2mm.)
  • Weight: 134gr. (Tolerance ± 5gr.)
  • Glass Fiber with Epoxy Resin
  • Manufactured by pultrusion


NOTE:
All our rods admit a certain tolerance in their measurements, this comes from the necessary cuts and the manufacturing process itself. In some cases, they may present irregular edges that in no case affect their quality, but their size.
Although we always try to send our rods with a size equal to or greater than the one offered, which we do in 99% of cases, remember that there is a reasonable margin by which we will not admit claims.
For this reason, and to avoid misunderstandings, if you need an extremely precise rod in cut or size, do not hesitate to let us know at the time of placing your order so that we can take it into account.


MATERIAL
Glass fiber
LENGTH
2000 mm.
DIAMETER
6 mm.

16 other products in the same category:

Customers who bought this product also bought: