Single-sided fiberglass sheet - 650 x 650 x 2 mm.
Single-sided fiberglass sheet - 650 x 650 x 2 mm.
Single-sided fiberglass sheet - 650 x 650 x 2 mm.
Single-sided fiberglass sheet - 650 x 650 x 2 mm.
Single-sided fiberglass sheet - 650 x 650 x 2 mm.
Single-sided fiberglass sheet - 650 x 650 x 2 mm.
Single-sided fiberglass sheet - 650 x 650 x 2 mm.
Single-sided fiberglass sheet - 650 x 650 x 2 mm.

Single-sided fiberglass sheet - 650 x 650 x 2 mm.

PFV1C2CC
Available for immediate shipment.
€21.18
Tax included
€17.50 tax 21% excl.

100% FIBERGLASS PLATE ONE SIDE VIEW

SIZE: 650mm. X 650mm.

THICKNESS: 2mm.

Possible imperfections in the finish.

100% secure payments
 

650mm. x 650mm. x 2mm. ONE FACE SEEN.

100% fiberglass sheet with one-sided finish.

The back face has an optimal rough surface to ensure good glued.

The resin used in the manufacture of these plates is polyester.

These plates offer an ideal solution to carry out jobs that require a smooth surface, light, resistant, inert, durable, that does not corrode and with a reasonable price.

You can use these sheets to make bottoms, sides, panels, screens, etc. in trailers, caravans, motorhomes, isotherms, yachts, boats, trucks, trolleys, cars, vans, roulottes, etc.

Due to their characteristics, they are perfect for covering walls in boats, camper vans, bodywork, bulkheads, showers, mobile homes, etc.

Both for repairs and to camper, build boxes or any other room where the characteristics offered by these plates are required.

To work with these sheets you can use both polyester and epoxy resin as well as any of our structural adhesives.

If you want us to manufacture a panel with specific characteristics for you, we can do it. If you need special measures, sandwich panels with light cores or thicknesses greater than those offered, send us an email and we will try to find a solution.

Due to the production process by which these plates are obtained, it is possible that they do not have flatness and present curvature. For structural or high precision work we recommend using double-sided plates.


FEATURES:

Dimensions: 650mm. x 650mm. (Tolerance ± 10mm.)

Thickness: 2mm. (Tolerance ± 0,5mm.)

Weight: 1125gr (Tolerance ± 250gr.)

Woven or non-woven fiberglass depending on availability or requirements

Orientation of the fibers: 0º / 90º in woven / random in nonwoven

These plates admit a certain tolerance in both their measurements and their thickness. You must take it into account when doing your work.


NOTE:
All our plates admit a certain tolerance in their measurements, this comes from the necessary cuts and the manufacturing process itself. In some cases, they may present irregular edges that in no case affect their quality, but their size.
Although we always try to send our plates with a size equal to or greater than the one offered, which we do in 90% of cases, remember that there is a reasonable margin by which we will not admit claims.
For this reason, and to avoid misunderstandings, if you need a very precise iron in the cut or size, do not hesitate to let us know at the time of placing your order so that we can take it into account.

COMMERCIAL SAMPLE:

You can buy a sample to see and touch the product at an economical price and with only € 1 of shipping costs.

 

Click HERE to buy.

KIND OF PRODUCT
Plate
MATERIAL
Glass fiber
CHARACTERISTICS
One side
THICKNESS
2 mm.
LENGTH
650 mm.
WIDTH
650 mm.
New

You might also like

16 other products in the same category:

Customers who bought this product also bought: