- COMMERCIAL SAMPLE OF TISSUE RESISTANT TO ABRSION AND WEAR
Cowboy fabric with kevlar and elastane fiber of 380 gr / m2.
Its composition with para-aramid makes this denim fabric much more resistant to friction and abrasion than a conventional one.
It provides extra protection with a fluffy, warm and elastic product perfect to use alone or in combination with other fabrics to be very pleasant to the touch with the skin.
Application as extra protection against falls with friction or abrasion such as those produced by motorcycle, etc.
Both for whole garments and to reinforce certain areas.
Look at the photos and the attached video if you want to see exactly what you are buying.
These tissues serve as protection given their good qualities in the face of aggressions, but they do not exempt the prudence and common sense that each one should apply to avoid accidents.
Likewise, in many occasions to obtain adequate protection, several layers of fabric must be used or different fabrics combined, ALWAYS being under the responsibility of the client the use made of these.
Therefore, Clipcarbono is not responsible in ANY case for any possible damage suffered by our customers during the use of our products.
Resistance to fire (**), cut (**) and abrasion (***).
Fluffy, warm and elastic
Roll width: 1450 mm.
Length: from 50 cm. up to 100 meters
Color: Blue cowboy, the para-aramid goes through the inner part, so it should not deteriorate due to sunlight.
Preparation of complete garments or extra reinforcement in clothing where comfort is important.
It is a very fine fabric to have a plus of protection without losing any comfort, in case you want to raise the protection considerably it can be combined with other thicker or technical fabrics
Claims for sample size will not be accepted. Because its purpose is only to know the product, exact measurements are not guaranteed, we will also try to send samples of measures similar to those indicated, but in any case, these may vary.