Epoxy resin for molds RE M - 500 gr
Epoxy resin for molds RE M - 500 gr

Epoxy resin for molds RE M - 500 gr

REM500
Available for immediate shipment.
€10.09
Tax included
€8.34 tax 21% excl.

Low-viscosity, resin for molds

Gel time:

Quick hardener (10-15min 20ºC)

Slow hardener (60-120min 20ºC)

Package of 500 gr.

100% secure payments
 

EPOXY RESIN FOR LAMINATION

EPOXY RESIN FOR MOLDS

  • Low viscosity

  • Good mechanical, chemical and temperature resistance properties

  • Can be used as a paint, with suitable hardener

  • Choice of hardener speed: fast, slow.

RE M epoxy resin is low viscosity. When curing amines or polyamines it offers high quality application properties such as high mechanical properties, good chemical resistance, excellent thermal properties, etc. It can be used as an epoxy paint, with a suitable hardener.

Special properties:

Viscosity 400-800 mPas / 25ºC. At normal storage temperatures, there is no crystallization. The advantage of a mixture of resin and hardener is recommended for its clarity.

The resin even at a temperature of 0-10 ° C is transparent, without haze like some epoxy resins. The resin and hardener are formed prior to lamination in a low viscosity system, which allows good simultaneous extrusion of wetting bubbles from the laminated surface.

Resin can be combined with hardener EE12 for fast cure and EE90 for slower cure and work time. The pot life of the mixture at 20ºC is between approx. 15 min. and 5 hours depending on the hardener used.

Non-sticky and high gloss surfaces are obtained.

For use with EE12 quick hardener, you can buy it "HERE" (10-15min 20ºC)

For use with EE90 slow hardener , you can buy it "HERE" (60-120min 20ºC)

_________________________________________________________

PERCENTAGE RESIN / HARDENER (by weight)

100/35

_________________________________________________________

For the management of the product it is essential to download and view the attached files that contain all the necessary information for a good use of this:

-DATA SHEET

-SAFETY FORM

-TRANSPORTATION FORM

TYPE RESIN
Epoxy
APPLICATION
Molds
New

16 other products in the same category:

Customers who bought this product also bought: