Medium viscosity with good wetting characteristics
Good mechanical, chemical and temperature resistance properties
Choice of hardener speed: fast, slow.
RE 3 is a standard stratified epoxy resin with medium viscosity, high hardness and chemical resistance. Standard resin for general use with high performance for manual rolling in open mold, with vacuum bags, countermold, etc. admitting in any case reinforcements with carbon fiber, aramid (such as Kevlar®) or glass.
This resin is manufactured from bisphenol A.
Special properties: Does not crystallize at room temperature. The resin and the hardener together form a viscous mixture that allows adequate impregnation of the fabric and, at the same time, elimination of air bubbles. This allows obtaining the best mechanical properties of the final product.
The resin can be combined with the hardener EE12 for a fast curing and with the EE90 for a curing and slower working time. The life range of the mixture at 20ºC is between approx. 10 minutes. and 2 hours depending on the hardener used.
Non-sticky and high gloss surfaces are obtained.
For use with EE12 quick hardener, you can buy it "HERE" (10-15min 20ºC)
For use with EE90 slow hardener, you can buy it "HERE" (60-120min 20ºC)