WE HAVE THE SHOVEL YOU ARE LOOKING FOR

Blades with two-sided gloss carbon fiber finish, with fiberglass interior for greater flexibility.

It is real carbon fiber combined with glass, pressed and oven cured. With constant thickness, very high hardness and very little weight.

If what you are looking for, in addition to the impressive aesthetics of polished carbon, is a shovel with considerable bending, do not hesitate, this is your shovel.

IN DIFFERENT LENGTHS AND FINISHES.

You will always find the shovel you are looking for, and if you do not find it, contact us and we will help you.

- The pole is supplied disassembled and with 1200 mm. of length.

- If you wish, you can buy the right or left sheet only, contact us.

- With detachable system and with or without angle adjustment.

CHARACTERISTICS:

• Blade dimensions: From 450mm. Up to 470mm (Tolerance ± 1mm.)

• Thickness: Variable according to zones

• Pole length: 1200 mm. (Tolerance ± 10mm.)

• Weight: 730gr (Tolerance ± 50gr. According to constructions)

• Heat resistant (Thermal stability 180º)

• Degree of flexibility: Minimum according to constructions.

• Carbon fiber 3K 200 gr / m2 Twill fabric 2x2 (Twill) and Taffeta 1x1 (Plain)

• Fiber orientation: 0º / 90º and 0º / 45º (Bidirectional)

___________

OTHER CONSTRUCTIONS:

- 100% Carbon: Lighter, harder, less flex, it gives you many benefits, in exchange you have to pamper it a little more.

- 75% Carbon - 25% Glass: With the laminated interior with a percentage of fiberglass to make a more flexible and economical product, ideal to adjust the appropriate blade to the strength of the paddle

- 50% Carbon - 50% Glass: With the laminated interior with a percentage of fiberglass to make a more flexible and economical product, ideal to adjust the appropriate blade to the strength of the paddler.

- 75% Carbon - 25% Kevlar: With the reinforced interior in Kevlar to achieve greater impact resistance, making it more durable.

- Special Rivers - Marathon: Even more resistant to impacts and friction, with Kevlar reinforcements inside and on the edges.

__________ 

NOTE:

All our blades admit a certain tolerance in their measurements, this is given by the necessary cuts and the manufacturing process itself. They may then present in some cases minimally irregular edges that in no case affect their quality, but if they do affect size.

Although we always try to send our blades with a size equal to that offered, which we do in 95% of cases, remember that there is a reasonable margin for which we will not accept claims.

For this reason, and to avoid misunderstandings, if you need a very precise blade in the cut or size, do not hesitate to let us know at the time of placing your order so that we can take it into account.