Carbon Fiber tube with integral guide, special for spearguns (31mm. Ø ext - 26mm. Ø int) 1000/1200mm
CARBON FIBER TUBE
SPECIAL SPEARGUNS
Special construction of very high rigidity and 100% real carbon fiber. With built-in integral guide.
Size 1000 or 1200mm. x (31mm. outside / 26mm. inside)
Carbon fiber tube, made entirely of high quality carbon fiber.
Manufactured in thickness of 2.5 mm. and with a special distribution of carbon fibers, it is designed to provide maximum rigidity to spearguns, minimizing the flexing caused by the tension of the rubber bands and thus achieving the highest possible precision in shooting.
Designed to withstand high loads and heavy rods.
You can mount it with most of the systems on the market since it will withstand practically any rubber system that you mount.
This is real carbon fiber, pressed and kiln cured. With constant thickness, very high hardness and very little weight.
Nothing to do with other tubes that use carbon and glass mixes or poorer constructions, which of course are cheaper but are not as rigid at all.
If you need a tube with other lengths, diameters or thicknesses, do not hesitate to contact us, for certain quantities we can manufacture it.
CHARACTERISTICS:
-
Length: 1000 or 1200mm. (Tolerance ±10mm.)
-
Outer diameter: 31mm. (Tolerance ±0.2mm.)
-
Inner diameter: 26mm. (Tolerance ±0.2mm.)
-
Wall: 2.5mm. (Tolerance ±0.2mm.)
-
Weight: 35gr for every 10 cm. length (Tolerance ±5gr.)
-
Carbon fiber: 3K 200 gr/m2 2x2 Twill Weave (Twill)
-
Fiber orientation: Bidirectional
____________________________________________________
NOTE:
All our tubes admit a certain tolerance in their measurements, this is given by the necessary cuts and the manufacturing process itself. Then, in some cases, they can present irregular edges that in no case affect their quality, but rather their size.
Although we always try to send our tubes with a size equal to or greater than the one offered, which we do in 90% of the cases, remember that there is a reasonable margin for which we will not accept claims.
For this reason, and to avoid misunderstandings, if you need a tube that is extremely precise in cut or size, do not hesitate to let us know when placing your order so that we can take it into account.
_____________________________________________________
Returns are not accepted on these tubes.
- MATERIAL
- Carbon fiber 100%
- THICKNESS
- 2,5 mm.
- FINISHED
- Smooth
- COLOR
- Black
- EXTERNAL DIAMETER
- 31 mm.
- INSIDE DIAMETER
- 26 mm.
- WALL THICKNESS
- 2,5 mm.
You might also like