Telescopic extension for carbon fiber pole - LENGTH: up to 3,6 meters
Telescopic extension for carbon fiber pole - LENGTH: up to 3,6 meters
Telescopic extension for carbon fiber pole - LENGTH: up to 3,6 meters
Telescopic extension for carbon fiber pole - LENGTH: up to 3,6 meters
Telescopic extension for carbon fiber pole - LENGTH: up to 3,6 meters
Telescopic extension for carbon fiber pole - LENGTH: up to 3,6 meters
Telescopic extension for carbon fiber pole - LENGTH: up to 3,6 meters
Telescopic extension for carbon fiber pole - LENGTH: up to 3,6 meters
Telescopic extension for carbon fiber pole - LENGTH: up to 3,6 meters
Telescopic extension for carbon fiber pole - LENGTH: up to 3,6 meters
Telescopic extension for carbon fiber pole - LENGTH: up to 3,6 meters
Telescopic extension for carbon fiber pole - LENGTH: up to 3,6 meters

Telescopic extension for carbon fiber pole - LENGTH: up to 3,6 meters

APT2T2CA
Available for immediate shipment.
€100.14
Tax included
€82.76 tax 21% excl.

COMPOSED BY 2 SECTIONS OF 2 METER (CLAMPS AND INCLUDED)

100% secure payments
 

TELESCOPIC EXTENSION FOR POLE

Extension for pole composed of carbon fiber tubes with visible mesh, made entirely of high quality carbon fiber.

It is real carbon fiber, pressed and cured in the oven.

The joining of the tubes is done with aluminum clamps with conical tightening by rotation. Quick release and very light weight.

The diameter of this pole goes from major to minor and the sections can be stored inside each other, adapting it in each case to the desired length.

If you are looking for a light and extensible pole, this is the solution. You will not find a lighter and stronger option. You can use it with different accessories.

Perfect for:

- Cleaning.

- Pruning

- Fumigation.

- Filming (image and sound).

- Advertising.

- Probes

- Etc.

If you want the sections to measure less than 2 meters, we can send them cut to the desired length. The price will be the same.

Carbon fiber is an electrically conductive material, so you have to take into account the necessary preventive measures depending on its use. It is recommended to use the fiberglass grip section to serve as an insulator.

Look at the attached photos if you want to see exactly what you are buying.

COMPOSITION:

Carbon fiber tube (16mm. external Ø - 14mm. inner Ø) 2000mm.

Model TC1614L2

Conical aluminum clamp to join tubes Ø 16x14mm. + Ø 19x17mm. 

 Abrazadera-IIN

Carbon fiber tube (19mm. external Ø - 17mm. inner Ø) 2000mm.

Model TC1917L2

Conical aluminum clamp to join tubes Ø 19x17mm. + Ø 22x20mm. 

 Abrazadera-IIIN

CHARACTERISTICS:

Extended total length: 5400mm. (Tolerance ± 10mm.)

Total length collected: 70mm. (Tolerance ± 10mm.)

Outside diameter of the larger tube: 19mm. (Tolerance ± 0.2mm.)

Wall of the tubes: 1mm. (Tolerance ± 0.2mm.)

Total weight: 376 gr. (Tolerance ± 50gr.)

Fiber: carbon 3K 200 gr / m2 Fabric Twill 2x2 (Twill)

Resin: Epoxy

Orientation of the fibers: Bidirectional

If you need a pole with another length, diameter or thickness, do not hesitate to contact us, we can manufacture it.

_____________________________________________________ 

NOTE:
All our tubes admit a certain tolerance in their measurements, this comes from the necessary cuts and the manufacturing process itself. They can then present in some cases irregular edges that in no case affect the quality of them, but if the size.
Although we always try to send our tubes with a size equal to or greater than the one offered, which we do in 90% of cases, remember that there is a reasonable margin for which we will not accept claims.
For this reason, and to avoid misunderstandings, if you need an extremely precise tube in the cut or size, do not hesitate to let us know at the time of placing your order so we can take it into account.
KIND OF PRODUCT
Telescopic pole
MATERIAL
Carbon fiber
WALL THICKNESS
1 mm.
LENGTH SECTION
2000mm.
CLAMP TYPE
conical aluminum
New

16 other products in the same category: