Single-sided kevlar fiber plate with epoxy resin - 1200 x 1000 x 1 mm.
Single-sided kevlar fiber plate with epoxy resin - 1200 x 1000 x 1 mm.
Single-sided kevlar fiber plate with epoxy resin - 1200 x 1000 x 1 mm.
Single-sided kevlar fiber plate with epoxy resin - 1200 x 1000 x 1 mm.

Single-sided kevlar fiber plate with epoxy resin - 1200 x 1000 x 1 mm.

1CK12101
Available for immediate shipment.
€217.22
Tax included
€179.52 tax 21% excl.

KEVLAR FIBER PLATE ONE SIDE VIEW WITH FIBERGLASS FILLING IN THE BACK

MADE WITH EPOXY RESIN

High aesthetic quality.

Low flatness (warped).

100% secure payments
 

1200mm x 1000mm x 1mm. ONE SIDE VIEW.

Plate with a one-sided gloss kevlar fiber finish, with fiberglass filling at the back until it reaches the indicated thickness.

These plates are made with epoxy resin and it is recommended the application of protective varnish in case you want to preserve the aesthetics of the plate for as long as possible in outdoor applications or with wear.

These plates are designed mainly for aesthetic applications where the plate is clamped. In case of needing structural properties or precision in the measurements or thickness, the use of double-sided sheets is recommended.

Look at the photos if you want to see exactly what you are buying.

CHARACTERISTICS:

Dimensions: 1200mm. x 1000mm (Tolerance ± 10mm.)

Approximate thickness: between 1mm. and 1,5mm.

Weight: 2500gr (Tolerance ± 500gr.)

 Kevlar fiber 3K 200 gr/m2 Taffeta fabric 1x1 (Plain)

Orientation of the fibers: 0º / 90º (Bidirectional)

Since these plates admit a certain tolerance both in their measurements and in their thicknesses, we indicate them for predominantly aesthetic works, recommending for more precise works, or of a structural nature, our double-sided plates and 100% carbon percentage.

__________________________________________________

NOTE:
All our plates admit a certain tolerance in their measurements, this is given by the necessary cuts and the manufacturing process itself. They can then present in some cases irregular edges that in no case affect the quality of them, but if the size.
Although we always try to send our plates with a size equal to or greater than the one offered, which we do in 90% of the cases, remember that there is a reasonable margin for which we will not accept claims.
For this reason, and to avoid misunderstandings, if you need a very precise plate in the cut or size, do not hesitate to let us know at the time of placing your order so we can take it into account.
 

KIND OF PRODUCT
Plate
MATERIAL
Kevlar-Carbono
CHARACTERISTICS
One side
THICKNESS
1 mm.
FINISHED
Gloss
LENGTH
1200 mm.
WIDTH
1000 mm.
New

You might also like

16 other products in the same category:

Customers who bought this product also bought: